-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - White - 1-1/2"
Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $4.44
$5.95- $4.44
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 1-1/2"
Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which are known to the...- $4.44
$5.95- $4.44
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Canvas Snap Tool
Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps. WARNING: This product can expose you to chemicals...- $30.14
$42.95- $30.14
- Unit price
- per
-
Vendor:GROCO
GROCO Thru-Hull Installation Tool
Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer. Slide the thru-hull fitting, flanged end first, over the tool. (It will stop at the proper step.) Tie a length of monofilament to the...- $143.86
$214.00- $143.86
- Unit price
- per
-
Vendor:GROCO
GROCO Spanner Wrench/Deck Plate Key
Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location. C83600 bronze- $24.34
$37.00- $24.34
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack
Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-PackUnlike the SOB standoffs which have a blind thread, the SOT series standoffshave a thread which runs all the way through the barrel of the standoff.This allows the standoff to be mounted...- $52.70
$67.99- $52.70
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-301 Adhesive Dispensing Gun w/10:1 Plunger f/AT-6030 Adhesive Only
Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives....- $43.75
$85.91- $43.75
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - Single
10:1 Gun Plunger for AT-6030 AdhesiveSingle Pack gun plunger for AT-6030 Adhesive (sold separately)- $14.33
$16.99- $14.33
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - 10-Pack
10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive (sold separately)- $138.65
$163.99- $138.65
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Executive Fastener Kit - No Adhesive
Executive Fastener Kit - No AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive The Weld Mount System Eliminates The...- $223.20
$295.99- $223.20
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Executive Adhesive & Fastener Kit w/AT-8040 Adhesive
Executive Adhesive & Fastener Kit w/AT-8040 AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder...- $280.13
$359.99- $280.13
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500
AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull...- $264.40
$319.99- $264.40
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5 Large White Nylon Tie Mount - Qty. 500
AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength...- $294.32
$329.99- $294.32
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 500
AT-3B Small Black Nylon Wire Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average...- $237.10
$268.99- $237.10
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3 Small White Nylon Tie Mount - Qty. 500
AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull...- $237.10
$268.99- $237.10
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Adhesively Bonded Fastener Kit w/AT 8040 Adhesive
Adhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8040 Adhesive (5) AT-850 Mixing Tip (1) AT-300 Dispensing Gun (2) AT-113B Black Footmans Loop (4) ST125-1420-16 Stainless Stud...- $146.06
$262.99- $146.06
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-850 Square Mixing Tips for AT-8040, AT-2010 & 4020 ADHESIVES 4" LONG - 10PK
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is...- $16.34
$20.99- $16.34
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount No Slide Metal/Composite Bonder
No Slide Metal/Composite BonderRevolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based,...- $36.21
$42.99- $36.21
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 50
AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long...- $82.78
$92.99- $82.78
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount No Slide Metal/Composite Bonder *Case of 10*
No Slide Metal/Composite Bonder *Case of 10*Revolutionary Metal Bonder will hold heavy parts at application without sliding on a vertical or overhead surface. AT-8040 will hold 3,500 lbs in 40 minutes - no Welding, Drilling, or Tapping.Weld Mount AT-8040 is a solvent-free, VOC Compliant,...- $345.90
$399.99- $345.90
- Unit price
- per
Vendor:Dometic
Dometic Universal Flush Mount Frame f/NRX130 Compressor Refrigerators - Black
Universal Flush Mount Frame for NRX130 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic NRX 130 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two...
- $142.89
$142.89- $142.89
- Unit price
- per
Vendor:MotorGuide
MotorGuide PinPoint GPS Replacement Remote
Pinpoint GPS Replacement RemoteReplacement remote for use with Xi5 ModelsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
- $134.26
$155.99- $134.26
- Unit price
- per
Vendor:MotorGuide
MotorGuide PinPoint GPS Navigation System
Pinpoint GPSMotorGuide's proprietary Pinpoint GPS technology - available either integrated with select models or as an easy upgrade. Pinpoint uses an ultra-precise GPS receiver and precision control algorithms for incredibly accurate performance.A compact, easy-to-use remote controls these Pinpoint features:Anchor Holds boat position on a...
- $455.78
$649.99- $455.78
- Unit price
- per
- Choosing a selection results in a full page refresh.