-
Vendor:Weld Mount
Weld Mount Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack
Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 PackStainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from...- $270.02
$273.99- $270.02
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Plastic Suction Cup Handle
Plastic Suction Cup HandleInjection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes, screws, or tools required. Ideal for cleaning waterlines or boat...- $31.41
$38.95- $31.41
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & 6030
AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 AdhesivesAT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives. (sold separately)- $21.84
$16.99- $21.84
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 8040 Acrylic Adhesive w/Plunger
8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has...- $26.64
$20.99- $26.64
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - White - 4"
Add-A-Snap - White - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $7.62
$6.35- $7.62
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Stainless Steel Bottle Opener w/Brushed Finish
Stainless Steel Bottle Opener with Brushed Finish Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects...- $28.62
$28.95- $28.62
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 4"
Add-A-Snap - Black - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $7.62
$6.35- $7.62
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - White - 2-1/2"
Add-A-Snap - White - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $7.48
$6.25- $7.48
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 2-1/2"
Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $7.48
$6.25- $7.48
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - White - 1-1/2"
Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $7.10
$5.95- $7.10
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 1-1/2"
Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which are known to the...- $7.10
$5.95- $7.10
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Canvas Snap Tool
Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps. WARNING: This product can expose you to chemicals...- $34.06
$44.95- $34.06
- Unit price
- per
-
Vendor:GROCO
GROCO Thru-Hull Installation Tool
Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer. Slide the thru-hull fitting, flanged end first, over the tool. (It will stop at the proper step.) Tie a length of monofilament to the...- $142.34
$210.00- $142.34
- Unit price
- per
-
Vendor:GROCO
GROCO Spanner Wrench/Deck Plate Key
Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location. C83600 bronze- $32.64
$31.00- $32.64
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75 Tall - 6-Pack
Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-PackUnlike the SOB standoffs which have a blind thread, the SOT series standoffshave a thread which runs all the way through the barrel of the standoff.This allows the standoff to be mounted...- $54.19
$65.99- $54.19
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-301 Adhesive Dispensing Gun w/10:1 Plunger f/AT-6030 Adhesive Only
Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive OnlyThe AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives....- $52.65
$85.91- $52.65
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - Single
10:1 Gun Plunger for AT-6030 AdhesiveSingle Pack gun plunger for AT-6030 Adhesive (sold separately)- $21.84
$15.99- $21.84
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-13 - 10:1 Gun Plunger f/AT-6030 Adhesive - 10-Pack
10:1 Gun Plunger for AT-6030 Adhesive10 Pack Gun Plunger for AT-6030 Adhesive (sold separately)- $133.21
$159.99- $133.21
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Executive Fastener Kit - No Adhesive
Executive Fastener Kit - No AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive The Weld Mount System Eliminates The...- $214.33
$289.99- $214.33
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount Executive Adhesive & Fastener Kit w/AT-8040 Adhesive
Executive Adhesive & Fastener Kit w/AT-8040 AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder...- $247.99
$319.99- $247.99
- Unit price
- per
Vendor:Dometic
Dometic Universal Flush Mount Frame f/NRX130 Compressor Refrigerators - Black
Universal Flush Mount Frame for NRX130 Compressor Refrigerators - BlackA universal flush mount installation frame for the Dometic NRX 130 fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for your fridge Two...
- $97.56
$133.29- $97.56
- Unit price
- per
Vendor:MotorGuide
MotorGuide PinPoint GPS Replacement Remote
Pinpoint GPS Replacement RemoteReplacement remote for use with Xi5 ModelsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
- $135.37
$155.99- $135.37
- Unit price
- per
Vendor:Dometic
Dometic Universal Flush Mount Frame f/NRX130S Compressor Refrigerators - Stainless Steel
Universal Flush Mount Frame for NRX130S Compressor Refrigerators - Stainless SteelA universal stainless steel flush mount installation frame for the Dometic NRX 130S fridges. For a secure fit and a luxury finish.Features: Securely fits your fridge in place A neat and smart frame for...
- $179.55
$245.29- $179.55
- Unit price
- per
- Choosing a selection results in a full page refresh.
