$50 to $200

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture....

LED Rectangular Flood Light - 1500 LumensThis marine grade LED Flood Light is constructed with a power coated aluminum housing with a stamped 304 stainless steel bracket. 6 super bright LEDs produce 1500 lumens. Low amp draw. 9-36V. IP67 waterproof rating.WARNING: This product can...

Tortuga Dimmer - 12/24VThe Tortuga Dimmer is designed to easily adjust the interior or exterior light level from 0-100% output. Touch the "up" button to turn the light on, and touch the "down" button to turn the light off. Press and hold either up or...

StrikerDesigned for Muskie, Halibut, Sturgeon and other big game fish. Stainless steel reinforced post, larger opening with easy lock / unlock ring. The inner support rotates with the rod to instantly remove and "strike" simultaneously. Complete with No. 241 combination deck / side mount.240Striker...

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs...

Stainless Steel Side Mount Rod Holder Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8” in diameter. Installs with four #8 RH fasteners (not included).WARNING: This product can expose you to...

Fillet Table Only - 30" Features: UV stabilized high-density polypropylene Solid one-piece construction for long life and easy maintenance Large, 30" wide by 12-5/8" deep, includes hose holder and towel bar Easily accessible knife and pliers holders Knives and pliers not included DOES NOT INCLUDE...

Round Tube Rail Mount Fillet Table - 20" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Medium table is 20" wide by 12-5/8" deep...

Fishing Series HandlesThe Fishing Series handles are a unique new design that focus on the same quality as Shurhold's original handles but also places emphasis on the handles aesthetic. The handles are sleek black with hand wrapped gold trim, and extra long foam fishing...

SXV300 Connect Tuner & Marine/RV AntennaConnect, control and enjoy all the wonders of satellite radio on the sky. The compact SXV300 tuner is truly plug-and-play with compatible car stereos and installs easily and discreetly behind the dash for a fully integrated look.Features: Flexible Installation:...

Shakespeare Style 4357-SAM/FM/VHF MARINE BAND SEPARATOREliminate the need for separate AM/FM antennas and operate AM/FM and VHF radios at the same time without interfering with VHF radio performance.Complete with 10' RG-62 AM/FM cable, 3' RG-58 VHF cable, and connector installed. Works with all types...

Horizontal Multi Cable Seal - BlackThe DS-H-MULTI-BLK takes Scanstrut's much-loved multi-cable seal to the next level. The multi-horizontal cable seal was designed to open new multi-cable routing options. This Scanstrut seal helps users achieve an ultra-clean, easy-to-fit, and 100% watertight installation of large electronics,...

Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mmThe DS-LP-30-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14mm (0.3–0.5") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail,...

Stainless Steel Low-Profile Cable Seal for Cables 2-8mmThe DS-LP-16-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.Premium ConstructionCrafted with attention to detail, its marine-grade 316 stainless steel...

DS-H6-BLK Horizontal Cable Seal - Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable...

DS-H10-BLK Horizontal Cable Seal- Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and...

DS-H10-BLK Horizontal Cable Seal- Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and...

DS-Multi Vertical Cable Seal Cable seals are designed to enable easy installation of electronics on board, providing a neat and stylish way of passing cables through the decks.  The durable IP68 rated Multi Deck Seal has been designed to fit multiple cables up to .71"...

DS21A-S Vertical Cable Seal - Stainless SteelScanstrut premium IP68 waterproof cable seal provides easy fit cable routing that cuts down your installation time and is the only guaranteed and proven watertight installation for your antenna and navlight cables. Features: Watertight installation - 100% waterproof with...

10W Battery Maintainer Portable SunChargerThe SC-10 SunCharger maintains the charge in any 12V battery using energy from the sun. Panel connects through 12V power plug or directly to battery with ring terminals. Perfect for battery maintenance when your car, boat, truck, ATV or RV is...