Products

NMEA 0183 Weather Station Cable - 15MWith NMEA 0183 output only. End in an Airmar 8-Pin connector which can be removed for connection to bare-wire devices.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any...

NMEA2000 Cable - 10MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.NMEA 2000 cables...

NMEA2000 Cable - 30MWeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station.NMEA 2000 cables...

No Connector Mix & Match CHIRP Cable - 1MAirmar's Mix & Match CHIRP Cable with no connector.Features: Length: 1M No Connector This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Noland RS11 Analog to NMEA 2000 Data ConverterThe RS11 is intended for converting Tach and analog sensor data into NMEA 2000 messages for display by devices such as chart plotter MFDs (Multifunction Displays). The engine connections are made to existing gauges or directly to...

Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000 watt).This product may not...

Single Handle Transducer Nut Wrench for B260, SS260, B265C, B275C260-WR-2 fits B260, SS260, B265C and B275C.

SS571 Stuffing Tube - Stainless Steel Replacement Stuffing Tube for R99, R109C, R209, R309, R409C, R509C, R609, CM260, CM265C, PM265C, CM111C, CM599C, M180 and M188 and most other Transducer thru-cable applications.Specifications: Hole Inner Diameter (inch/mm): 1"/25mm, Shaft OD 1.68"/43mm Usable Shaft Length: 1.85 in. This...

ST850 Paddlewheel & Valve KitIncludes: 1 Paddlewheel and Shaft 4 O-rings 1 Valve Sleeve This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WS-C10 NMEA 0183 Cable for Heading Sensors WeatherWith NMEA 0183 output only. End in an Airmar 8-Pin connector which can be removed for connection to bare-wire devices.10M/33'This product may not be returned to the original point of purchase. Please contact the manufacturer directly with...

WS-C25 25M NMEA 0183 Cable for 120WXWith NMEA 0183 output only. End in an Airmar 8-Pin connector which can be removed for connection to bare-wire devices.25M/82'This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any...

WS2-C06 NMEA 2000 Cable for Heading Sensor WeatherWith NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector 6M cable.6M/20'This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns....

12 Gallon (47L) Waste Water Tank CPL Diaphragm - 12VComplete waste water tank kit with pump ready to install.Including a 47L (12.5 G) rectangular tank in reinforced polyethylene, waste water diaphragm pump 12V, gas vent, active carbon filter, control panel and probe for level...

12 Gallon (47L) Waste Water Tank CPL Macerator - 12VComplete waste water tank kit with pump ready to install.Including a 47L (12.5 G) rectangular tank in reinforced polyethylene, waste water macerator pump 12V, gas vent, active carbon filter, control panel and probe for level...

12V Flush PumpA silent and robust flush pump to be used with any toilet with any 12V external flush system. Port connections inlet/ outlet 19mm (3/4").Specifications: Weight: 0.9kg/1lb Voltage: 12V Port connections inlet/ outlet 19mm (3/4") *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic...

19 Gallon (72L) Waste Water Tank CPL Diaphragm - 12VComplete waste water tank kit with pump ready to install.Including a 72L (19 G) rectangular tank in reinforced polyethylene, waste water diaphragm pump 12V, gas vent, active carbon filter, control panel and probe for level...

19 Gallon (72L) Waste Water Tank CPL Macerator - 12VComplete waste water tank kit with pump ready to install.Including a 72L (19 G) rectangular tank in reinforced polyethylene, waste water macerator pump 12V, gas vent, active carbon filter, control panel and probe for level...

3-Way Bilge Panel - 12/24VThree- positions switch bilge pump control panel 12/24V. Manual, automatic and off.Features: The automatic feature operates in combination with automatic bilge level switches or automatic bilge pumps Integrated fuse holder, fuse and operating light

Accumulator Tank - 0.85L (0.22g)Accumulator and pulsation dampering tank for water pressure systems. Features: Premium solution for a maximum smoothness flow system  Corrosion free