{"title":"Victron Batteries","description":"","products":[{"product_id":"victron-argo-diode-battery-isolator-160amp-2-batteries","title":"Victron Argo Diode Battery Isolator - 160AMP - 2 Batteries","description":"\u003cp\u003e\u003cstrong\u003eArgo Diode Battery Isolator - 160AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.roamridge.com\/cdn\/shop\/files\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668278485067,"sku":"ARG160201020","price":90.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/82889XL.jpg?v=1754550897"},{"product_id":"victron-argofet-battery-isolator-100amp-2-batteries","title":"Victron ArgoFET Battery Isolator - 100AMP - 2 Batteries","description":"\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator - 100AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.roamridge.com\/cdn\/shop\/files\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668278517835,"sku":"ARG100201020","price":100.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/82890XL.jpg?v=1754550899"},{"product_id":"victron-argofet-200-2-battery-isolator-200amp-1-alternator-2-batteries","title":"Victron ArgoFET 200-2 Battery Isolator - 200AMP - 1 Alternator, 2 Batteries","description":"\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator - 200AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.roamridge.com\/cdn\/shop\/files\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668278550603,"sku":"ARG200201020R","price":119.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/82891XL.jpg?v=1754550900"},{"product_id":"victron-argo-fet-battery-isolator-100-3-3-batteries-100amp","title":"Victron Argo FET Battery Isolator 100-3 3 Batteries - 100AMP","description":"\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator 100-3 3 Batteries - 100AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low currents and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668278616139,"sku":"ARG100301020","price":114.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/85114XL.jpg?v=1754550903"},{"product_id":"victron-argo-fet-battery-isolator-200-3-3-batteries-200amp","title":"Victron Argo FET Battery Isolator 200-3 3 Batteries - 200AMP","description":"\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator 200-3 3 Batteries - 200AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668278648907,"sku":"ARG200301020","price":140.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/85115XL.jpg?v=1754550904"},{"product_id":"victron-argofet-battery-isolator-100-3-3-batteries-100amp","title":"Victron Argofet Battery Isolator 100-3 3 Batteries - 100AMP","description":"\u003cp\u003e\u003cstrong\u003eArgofet Battery Isolator 100-3 3 Batteries - 100AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to Argodiode battery isolators, Argofet isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with Argodiode battery isolators, Argofet isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. \u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668278779979,"sku":"ARG100301020R","price":114.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/96504XL.jpg?v=1754550910"},{"product_id":"victron-argodiode-battery-isolator-80-2ac-2-batteries-80a","title":"Victron Argodiode Battery Isolator 80-2AC - 2 Batteries - 80A","description":"\u003cp\u003e\u003cstrong\u003eArgodiode Battery Isolator 80-2AC - 2 Batteries - 80A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668279337035,"sku":"ARG080201000","price":50.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/106480XL.jpg?v=1754550935"},{"product_id":"victron-argodiode-battery-isolator-80-2sc-2-batteries-80a","title":"Victron Argodiode Battery Isolator 80-2SC - 2 Batteries - 80A","description":"\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eArgodiode Battery Isolator 80-2SC - 2 Batteries - 80A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668279369803,"sku":"ARG080202000","price":39.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/106481XL.jpg?v=1754550937"},{"product_id":"victron-argodiode-battery-isolator-140-3ac-3-batteries-140a","title":"Victron Argodiode Battery Isolator 140-3AC - 3 Batteries - 140A","description":"\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eArgodiode Battery Isolator 140-3AC - 3 Batteries - 140A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668279402571,"sku":"ARG140301020R","price":95.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/106482XL.jpg?v=1754550938"},{"product_id":"victron-argodiode-battery-isolator-180-3ac-3-batteries-180a","title":"Victron Argodiode Battery Isolator 180-3AC - 3 Batteries - 180A","description":"\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eArgodiode Battery Isolator 180-3AC - 3 Batteries - 180A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668279435339,"sku":"ARG180301020","price":109.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/106484XL.jpg?v=1754550940"},{"product_id":"victron-argo-diode-battery-combiner-80amp-2-batteries","title":"Victron Argo Diode Battery Combiner - 80AMP - 2 Batteries","description":"\u003cp\u003e\u003cstrong\u003eArgo Diode Battery Combiner - 80AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a Diode Battery Combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/www.roamridge.com\/cdn\/shop\/files\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668287725643,"sku":"BCD000802000","price":45.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/82903XL.jpg?v=1754551255"},{"product_id":"victron-ve-bus-bms-f-victron-lifepo4-batteries-12-48vdc-works-w-all-ve-bus","title":"Victron VE.Bus BMS f\/Victron LiFePO4 Batteries 12-48VDC Works w\/All VE.Bus","description":"\u003cp\u003e\u003cstrong\u003eVE.Bus BMS for Victron LiFePO4 Batteries 12-48VDC Works with All VE.Bus\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe VE.Bus BMS protects each individual cell of a Victron lithium-iron-phosphate (LiFePO4 or LFP) battery.\u003c\/p\u003e\u003cp\u003eEach individual cell of a LiFePO4 battery must be protected against over-voltage, under-voltage, and over-temperature. Victron LiFePO4 batteries have integrated Balancing, Temperature, and Voltage control (acronym: BTV) and connect to the VE.Bus BMS with two M8 circular connector cord sets. The BTVs of several batteries can be daisy-chained. Please see our LiFePO4 battery documentation for details.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe BMS will:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShut down or disconnect loads in case of the imminent cell under voltage.\u003c\/li\u003e\n\u003cli\u003eReduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only, see below).\u003c\/li\u003e\n\u003cli\u003eShut down or disconnect battery chargers in case of imminent cell overvoltage or over-temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668288053323,"sku":"BMS300200000","price":117.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/84920XL.jpg?v=1754551271"},{"product_id":"victron-lynx-smart-bms-500-battery-mgmt-system-f-lithium-smart-batteries","title":"Victron Lynx Smart BMS 500 Battery MGMT System f\/Lithium Smart Batteries","description":"\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 500 Battery MGMT System for Lithium Smart Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature-rich and complete option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch\u003c\/li\u003e\n\u003cli\u003eBattery monitor, indicating the state of charge percentage and more data.\u003c\/li\u003e\n\u003cli\u003ePre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.\u003c\/li\u003e\n\u003cli\u003eBluetooth for use with our VictronConnect App, for setup and monitoring.\u003c\/li\u003e\n\u003cli\u003eLocal and remote monitoring using a Victron GX device, for example, the Cerbo GX.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Lynx Smart BMS is part of the modular Lynx distribution system.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668289364043,"sku":"LYN034160200","price":997.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/90143XL.jpg?v=1754551294"},{"product_id":"victron-smart-bms-cl-12-100-f-victron-lifepo4-batteries-12vdc-only","title":"Victron Smart BMS CL 12\/100 f\/Victron LIFEPO4 Batteries 12VDC Only","description":"\u003cp\u003e\u003cstrong\u003eSmart BMS CL 12\/100 f\/Victron LIFEPO4 Batteries 12VDC Only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BMS CL 12\/100 is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator.\u003c\/p\u003e\u003cp\u003eThe BMS CL 12\/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources, or DC loads in case of low battery voltage, high battery voltage, or over temperature.\u003c\/p\u003e\u003cp\u003eThe dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries.\u003c\/p\u003e\u003cp\u003eThe BMS is also equipped with a remote on\/off the connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668289429579,"sku":"BMS110022000","price":166.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/92590XL.jpg?v=1754551297"},{"product_id":"victron-smart-bms-12-200-f-victron-lifepo4-batteries-12vdc-only","title":"Victron Smart BMS 12\/200 f\/Victron LIFEPO4 Batteries 12VDC Only","description":"\u003cp\u003e\u003cstrong\u003eSmart BMS 12\/200 for Victron LIFEPO4 Batteries 12VDC Only\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BMS 12\/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats.\u003cbr\u003e\u003cbr\u003eIt combines a Current Limiter, Battery Combiner, and Battery Protector in a robust and compact solution and lets you safely connect any size 12V alternator (and starter battery), loads, and chargers to Smart Lithium batteries.\u003cbr\u003e\u003cbr\u003eThe Smart BMS 12\/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources, or DC loads in case of low battery cell voltage, high battery cell voltage, or over temperature.\u003cbr\u003e\u003cbr\u003eThe dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge.\u003cbr\u003e\u003cbr\u003eThe BMS is equipped with Bluetooth for monitoring and configuration, a remote on\/off the connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e\u003ch2 style=\"color:#1e3c0a; margin-bottom:20px;\"\u003e Access More PDF Resources Below \u003c\/h2\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/92597QG.pdf\" style=\"display: inline-block; margin-right: 10px; padding: 10px 20px; background-color: #4CAF50; color: white; text-align: center; text-decoration: none; border-radius: 5px; font-weight: bold; cursor: pointer;\" target=\"_blank\"\u003e Quick Guide Literature \u003c\/a\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/92597OM.pdf\" style=\"display: inline-block; margin-right: 10px; padding: 10px 20px; background-color: #4CAF50; color: white; text-align: center; text-decoration: none; border-radius: 5px; font-weight: bold; cursor: pointer;\" target=\"_blank\"\u003e Owners Manual \u003c\/a\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/92597BR.pdf\" style=\"display: inline-block; margin-right: 10px; padding: 10px 20px; background-color: #4CAF50; color: white; text-align: center; text-decoration: none; border-radius: 5px; font-weight: bold; cursor: pointer;\" target=\"_blank\"\u003e Brochure Literature \u003c\/a\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/installations\/92597IN.pdf\" style=\"display: inline-block; margin-right: 10px; padding: 10px 20px; background-color: #4CAF50; color: white; text-align: center; text-decoration: none; border-radius: 5px; font-weight: bold; cursor: pointer;\" target=\"_blank\"\u003e Installation Guide \u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668289626187,"sku":"BMS210055000","price":232.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/92597XL.jpg?v=1754551305"},{"product_id":"victron-smallbms-f-smart-lifepo4-batteries-w-m8","title":"Victron SmallBMS f\/Smart LiFePO4 Batteries w\/M8","description":"\u003cp\u003e\u003cstrong\u003eSmallBMS for Smart LiFePO4 Batteries with M8\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA simple and low-cost alternative to the VE.Bus BMS. The smallBMS can replace the VE.Bus BMS in several applications. It is however not suitable for use with VE.Bus MultiPlus and Quattro inverter\/chargers: it has no VE.Bus interface.\u003c\/p\u003e\u003cp\u003eThe smallBMS is intended for use with Victron Smart LiFePo4 batteries with M8 circular connectors. The smallBMS has three outputs, similar to the VE.Bus BMS. Load Disconnect output The Load output is normally high and becomes free-floating in case of the cell under voltage (default 2,8V\/cell, adjustable on the battery between 2,6V and 2,8V per cell). Maximum current: 1A. The Load output is not short-circuit protected.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Load output can be used to control:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA high current relay or contactor.\u003c\/li\u003e\n\u003cli\u003eThe remote on\/off the input of a Battery Protect, inverter or DC-DC converter, or other loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePre-alarm output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe pre-alarm output is normally free-floating and becomes high in case of the imminent cell under voltage (default 3,1V\/cell, adjustable on the battery between 2,85V and 3,15V per cell). Maximum current: 1A (not short circuit protected).\u003c\/p\u003e\u003cp\u003eThe minimum delay between pre-alarm and load disconnect is 30 seconds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCharge disconnect output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Charger output is normally high and becomes free-floating in case of imminent cell overvoltage or over-temperature. Maximum current: 10mA. The Charger output is not suitable to power an inductive load such as a relay coil. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe Charger output can be used to control:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe remote on\/off of a charger\u003c\/li\u003e\n\u003cli\u003eA Cyrix-Li-Charge relay\u003c\/li\u003e\n\u003cli\u003eA Cyrix-Li-ct Battery Combiner\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSystem on\/off input\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe system on\/off input controls both outputs. When off, both outputs will be free floating so that loads and chargers are turned off. The System on\/off consists of two terminals: Remote L and Remote H. A remote on\/off switch or relay contact can be connected between L and H. Alternatively, terminal H can be switched to battery plus, or terminal L can be switched to battery minus.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects 12V, 24V and 48V systems\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOperating voltage range: 8 to 70V DC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLED indicators:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLoad ON (blue): Load output high (cell voltage \u0026gt;2.8V, adjustable on the battery).\u003c\/li\u003e\n\u003cli\u003eTemp or OVP (red): Charger output free floating (due to cell over temperature (\u0026gt;50°C), cell under temperature (\u0026lt;5 °C) or cell over voltage).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668289658955,"sku":"BMS400100000","price":49.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/92772XL.jpg?v=1754551306"},{"product_id":"victron-ve-bus-bms-v2-f-victron-lifepo4-batteries-12-48vdc-work-w-all-ve-bus-amp-gx-devices","title":"Victron VE.Bus BMS V2 f\/Victron LiFePO4 Batteries 12-48VDC - Work w\/All VE.Bus \u0026 GX Devices","description":"\u003cp\u003e\u003cstrong\u003eVE.Bus BMS V2 for Victron LiFePO4 Batteries 12-48VDC - Work with All VE.Bus \u0026amp; GX Devices\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe VE.Bus BMS and VE.Bus BMS V2 is Battery Management System (BMS) designed to interface with and protect a single or multiple Victron Lithium Battery 12,8V \u0026amp; 25,6V Smart (LiFePO4 or LFP) in systems that have Victron inverters or inverter\/chargers with VE.Bus communication. It monitors and protects the batteries against the over voltage and under voltage of any individual cell, and also over temperature or under temperature conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBased on the status of the battery or batteries, the BMS will:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenerate a pre-alarm signal to alert of an imminent cell under voltage conditions.\u003c\/li\u003e\n\u003cli\u003eDisable inverting in VE.Bus inverters or inverters\/chargers via VE.Bus, and disable other loads via the 'Load Disconnect' terminal in the event of a cell under voltage conditions.\u003c\/li\u003e\n\u003cli\u003eDisable charging in VE.Bus inverters or inverters\/chargers via VE.Bus and disable other chargers via the 'Charge Disconnect' terminal in the event of a cell overvoltage, under-temperature, or over-temperature conditions.\u003c\/li\u003e\n\u003cli\u003eThe \"original\" VE.Bus BMS is best used in systems without a GX device\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe \"next generation\" VE.Bus BMS V2 has additional features such as:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote on\/off terminals.\u003c\/li\u003e\n\u003cli\u003eAbility to disable VE.Direct and VE.Can solar chargers via a GX device.\u003c\/li\u003e\n\u003cli\u003eAllowing control of the VE.Bus inverter\/charger from multiple devices, like the Digital Multi Control, the VE.Bus Smart dongle and\/or a GX device.\u003c\/li\u003e\n\u003cli\u003eAuxiliary power input and output terminals that allow a GX device to remain powered in the event of a system shutdown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668289953867,"sku":"BMS300200200","price":156.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/96950XL.jpg?v=1754551317"},{"product_id":"victron-lynx-smart-bms-1000-battery-management-system-f-lithium-smart-batteries","title":"Victron Lynx Smart BMS 1000 Battery Management System f\/Lithium Smart Batteries","description":"\u003cp\u003e\u003cstrong\u003eLynx Smart BMS 1000 Battery Management System for Lithium Smart Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Lynx Smart BMS is a dedicated Battery Management System (BMS) for the Victron Lithium Battery Smart batteries. These batteries are Lithium Iron Phosphate (LiFePO4) batteries and are available in 12.8 V or 25.6 V in various capacities. They can be connected in series, parallel, and series\/parallel so that a battery bank can be built for system voltages of 12V, 24 V, or 48 V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12 V and up to 102 kWh in a 24 V1) and 48 V1) system.\u003c\/p\u003e\u003cp\u003eOut of the various available BMSes, the Lynx Smart BMS is the most feature-rich and complete option and integrates seamlessly into the Lynx Distributor system. This model is a 1000 A (M10) version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBuilt-in 1000 A Contactor\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe contactor acts as a secondary safety system to protect the battery in case the primary controls (ATC, ATD, and\/or DVCC) fail to disable loads and\/or chargers when required and is also suitable as a remote controllable main system switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePre-charge Circuit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn addition to the contactor, a built-in pre-charge circuit prevents high inrush currents when connecting a capacitive load such as a MultiPlus\/Quattro or other inverter, eliminating the need for external pre-charging.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMonitoring and Control\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMonitor and control the BMS via Bluetooth using the VictronConnect App or a GX device such as a Cerbo GX and the VRM Portal. A built-in battery monitor that operates similarly as the other Victron Energy battery monitors, provides data such as state of charge, voltage, current, historical data, status info, and more in real-time and with instant readout even without the need to connect to the BMS, allowing diagnostic at a glance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDVCC closed Loop Control as Well as ATC\/ATD Contacts\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCompatible Victron inverters\/chargers and solar chargers are automatically controlled via a connected GX device and DVCC. The ATC\/ATD contacts can be used to control other chargers and loads that have a remote on\/off port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProgrammable Relay\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe relay can be used either as an alarm relay (combined with the pre-alarm) or to control an alternator via its external regulator (ignition cable). In Alternator ATC mode, the relay will only activate when the contactor is closed. Alternator ATC contact of the alternator opens first and then with a delay of 2 seconds the contactor. These 2 seconds ensure that the alternator is switched off before the battery is disconnected from the system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAUX Terminal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe advantage of the onboard auxiliary power supply (1.1 A @ system voltage) is to provide power to specific loads (i.e. a GX device) after the BMS has shut down the loads in the event of a low cell voltage event. If no charge voltage is detected within 5 minutes, the BMS, including the AUX connection switches off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVE.Can and NMEA 2000 Data Communication\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVE.Can allows for easy connection (standard RJ45 network cable) and communication with a GX device. Since the CANbus protocol is based on NMEA 2000 (and J1939), it is easy to integrate into a marine network and feed a marine MFD with data (requires a VE.Can to NMEA 2000 micro-C male cable).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLynx Distributor Fuse Monitoring\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead out the fuse status and receive an alarm in case a fuse is blown. The Lynx Smart BMS monitors up to 4 connected Lynx Distributors and their fuses via VictronConnect or a GX device 1) To reduce the required balancing time, we recommend using as many different batteries in series as possible for the application. 24 V systems are best built using 24 V batteries, and a 48 V system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis System Contains the Following Components:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLynx Distributor with 2 fused paralleled lithium-ion smart batteries.\u003c\/li\u003e\n\u003cli\u003eLynx Smart BMS with BMS, contactor, and battery monitor\u003c\/li\u003e\n\u003cli\u003eA second Lynx distributor provides fused connections for inverter\/charger(s), loads and chargers (additional modules can be added if more connections are needed)\u003c\/li\u003e\n\u003cli\u003eA Cerbo GX (or other GX device) to read out the Lynx Smart BMS and Lynx Distributor data.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePower Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBattery Voltage Range: 9 – 60 VDC\u003c\/li\u003e\n\u003cli\u003eMaximum Input Voltage: 75 VDC\u003c\/li\u003e\n\u003cli\u003eSupported System Voltages: 12, 24, or 48 V\u003c\/li\u003e\n\u003cli\u003eReverse Polarity Protection: No\u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Continuous Current Rating: 1000 A continuous\u003c\/li\u003e\n\u003cli\u003eMain Safety Contactor Peak Current Rating: 1200 A for 5 minutes \u003c\/li\u003e\n\u003cli\u003ePower Consumption OFF Mode: 0.3 mA for all system voltages\u003c\/li\u003e\n\u003cli\u003ePower Consumption in Standby Mode: Approximately 0.6 W (50 mA at 12 V)\u003c\/li\u003e\n\u003cli\u003ePower Consumption in ON Mode: Approx. 2.6 W (217 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eApproximately 4.2 W (350 mA at 12 V) depending on the state of the relays\u003c\/li\u003e\n\u003cli\u003eMinimum Load Resistance for Pre-Charging: 10 Ω and above for 12 V systems, 20 Ω and above for 24 V and 48 V systems\u003c\/li\u003e\n\u003cli\u003eAUX Output Maximum Current Rating: 1.1 A continuous, protected by resettable fuse\u003c\/li\u003e\n\u003cli\u003eAllow-to-Charge Port Maximum Current Rating: 0.5 A at 60 VDC, protected by a resettable fuse\u003c\/li\u003e\n\u003cli\u003eAllow-to-Discharge Port Maximum Current Rating: 0.5 A at 60VDC, protected by a resettable fuse\u003c\/li\u003e\n\u003cli\u003eAlarm Relay (SPDT) Maximum current Rating: 2 A at 60 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConnections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBusbar: M10 (Torque: 17 Nm)\u003c\/li\u003e\n\u003cli\u003eVE.Can: RJ45\u003c\/li\u003e\n\u003cli\u003eI\/O: Removable multi-connector with screw terminals\u003c\/li\u003e\n\u003cli\u003eBattery BTV Cables: Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected in one system Lynx Distributor fuse monitoring (up to 4 modules) RJ10 (cable ships with each Lynx Distributor)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePhysical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnclosure Material: ABS\u003c\/li\u003e\n\u003cli\u003eEnclosure Dimensions (h x w x d): 230 x 180 x 100 mm\u003c\/li\u003e\n\u003cli\u003eUnit Weight: 2.7 kg\u003c\/li\u003e\n\u003cli\u003eBusbar Material: Tinned copper\u003c\/li\u003e\n\u003cli\u003eBusbar Dimensions (h x w): 8 x 30 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnvironmental Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -40 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003eStorage Temperature Range: -40 °C to +60 °C\u003c\/li\u003e\n\u003cli\u003eHumidity Max.: 95 % (non-condensing)\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP22\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: EN-IEC 63000:2018\u003c\/li\u003e\n\u003cli\u003eEMC: EN-IEC 61000-6-3:2007\/A1:2011\/AC:2012\u003c\/li\u003e\n\u003cli\u003eQMS: NEN-EN-ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668290379851,"sku":"LYN034170210","price":1178.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/101855XL.jpg?v=1754551328"},{"product_id":"victron-bcd-402-combiner-diode-2-batteries-40a-bcd402","title":"Victron BCD 402 Combiner Diode - 2 Batteries - 40A BCD402","description":"\u003cp\u003e\u003cstrong\u003eBCD 402 Combiner Diode - 2 Batteries - 40A BCD402\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiode Battery Combiners guarantee continuous DC power to mission-critical equipment, such as an electronic engine control system. With a Diode Battery Combiner, two or more DC power sources can be used in parallel to supply the mission-critical load. Failure of one source will not interrupt power to the critical load.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Argo Battery Combiners feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output approximately 0,45 V.\u003c\/p\u003e\u003cp\u003eWarning: hot surface, mount the Argo Diode Battery Combiner on a non-flammable surface only!\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lsnp1p ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":41668290871371,"sku":"BCD000402000","price":36.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/4621\/6267\/files\/106488XL.jpg?v=1754551347"}],"url":"https:\/\/www.roamridge.com\/collections\/victron-batteries.oembed","provider":"Roam Ridge","version":"1.0","type":"link"}